Neck Blank - Maple

Canadian maple neck blanks

1 piece, typically 700mm x 105mm x 26mm - suitable to make a maple electric guitar neck with eg rosewood fingerboard.

These pieces are typically mostly smooth on one side, and roughly thicknessed on the other. There is plenty of material to get the neck absolutely flat and smooth at standard 3/4" (19.05mm) thickness.

The diagram shows how the neck wood is transformed into an acoustic guitar neck. The diagram shows the 'scarf joint' made by an angled cut at point A. The off-cut is then flipped over and glued underneath the neck to create the headstock. Section B is a solid heel, and section C is a stacked heel using 3 pieces of wood.

For an electric guitar, either of our maple or mahogany neck blanks can be used to create a neck profile shown.